Cookworks HB951H3 Bakım ve Kullanım Kılavuzu - Sayfa 4

Mutfak Aletleri Cookworks HB951H3 için çevrimiçi göz atın veya pdf Bakım ve Kullanım Kılavuzu indirin. Cookworks HB951H3 7 sayfaları.

To use

1. Clean the hand blender thoroughly before first use.

2. Fit the stem onto the motor housing. Position the stem as shown

in parts diagram, align the black arrow on the collar with the

'unlocked' padlock symbol on the motor housing and fit together.

Turn the motor housing clockwise to lock into position.

arrow will now be aligned with the 'locked' padlock symbol.

3. Place the ingredients to be blended into the beaker or another a

suitable deep sided container and place the container onto a

stable surface. Do not overfill the beaker (max 550ml).

4. Fully unwind the hand blender cable and plug in.

5. Place the head of the blender below the surface of the

ingredients.

shown in the diagram above.

6. Move the indentation on the speed slider fully to the right hand

side, switch on and hold down the blender ON/OFF button.

7. Blend for a maximum of 10 seconds high speed / 30 seconds low

speed.

If further blending is required, wait 2 minutes before

restarting the blender.

8. After a total of 5 of the above cycles, the blender should be

rested for 30 minutes.

9. The speed of the blender can be increased by moving the speed

slider towards the left hand side.

10. To switch off, release the ON/OFF button and allow the blade to

come to a complete stop before checking the consistency of the

mix. If satisfactory, remove the blender

11. To stop or interrupt the blending process, release the button or

turn off at the mains.

Notes:

Do not run the blender dry (without the head covered by liquid).



To avoid splashing, ensure head of the blender is within the



blending container and the head is covered before starting or

removing.

Do not add extra ingredients into the beaker / blending container



when the blender is operating.

ISSUE-1 24/7/2017

Do not immerse the stem beyond the max level

The