Cookworks 423/7350 Kullanım Kılavuzu - Sayfa 4

Fryer Cookworks 423/7350 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Cookworks 423/7350 7 sayfaları. Stainless steel deep fryer

Sayfayı Yazdır
Cookworks 423/7350 Kullanım Kılavuzu

Assembly instruction

Place the fryer base on a stable, flat and dry surface.

Preparing oil/ fat

It is advised that never mix different types of oil or fat. We recommended you to use frying oil or liquid
frying fat. If you intent to use solid frying fat, the following steps must be taken to prevent the fat from
spattering.
1.
Put the blocks of fat into normal pan and melt it first with a low heat.
2.
Pour the melted fat carefully into the fryer.
If the solid fat is solidified from last frying operation, punch some holes into the solidified fat with a fork.

USING THE APPLIANCE

1.
Place the fryer on a stable, flat and dry surface.
2.
Ensure the fryer is switched off.
3.
Slowly fill the oil between the minimum and maximum oil level marks inside the oil bowl. Follow
the section "Preparing oil/ fat" if you are using oil fat for frying.
Oil level
Min.
Max.
4.
Set the temperature knob to the required temperature and switch on the appliance.
5.
The pilot light will go off when the temperature is reached. The oil or fat will be heated to the
selected temperature in 8 to 12 minutes.
6.
With the basket positioned on the hook, put the food into the basket (e.g. fries) and slowly
immerse into the heated oil or fat.
7.
Ensure the basket has been inserted properly. The appliance shall be used with the lid off.
8.
During the frying cycle, the pilot light will go on and off and this is normal as the appliance is
equipped with a temperature regulator.
9.
Should you accidentally switch ON your deep fryer without oil, or without the minimum amount of
oil required, the deep fryer will automatically cut-out, to stop the appliance overheating. If this
should happen, firstly switch off and unplug the deep fryer. Wait until the element cools down.
Use a pin or small screwdriver to push downward onto the reset button. This will reset the deep
fryer. Your fryer is now ready to use.

After frying

1.
Remove the basket from the fryer.
2.
Shake the basket to remove excess oil or fat. Also you could put the fried food in a bowl
containing grease-absorbing paper, e.g. kitchen paper.
3.
Switch off the appliance.
4.
Unplug the appliance after use.
5.
Let it cool down before cleaning or moving away.
Litre
2.5 litre
3.0 litre
4