Austro Engine E4-Series Bakım Kılavuzu - Sayfa 5

Motor Austro Engine E4-Series için çevrimiçi göz atın veya pdf Bakım Kılavuzu indirin. Austro Engine E4-Series 8 sayfaları.

4. Remove stud bolt by turning the first M10 nut (red) or both nuts in counterclockwise

direction.

If both nuts turn counterclockwise and stud bolt does not move repeat procedure using

screwlock (e.g.Loctite 2701).

Do not overtighten nuts on stud bolt! If stud bolt is wrenched off it cannot be

removed! In this case the whole T/C must be replaced!

Welding on stud bolts is not allowed! It may cause damage to the engine or the

T/C internals!

Issue Date: 04.08.2021

Maintenance Manual

E4-Series

Turbocharger stud repair

E4.08.04

MM-TR-MDC-E4-469

208