BENDEL 810 010 Orijinal Kullanım Kılavuzu - Sayfa 6
Elektrikli Alet BENDEL 810 010 için çevrimiçi göz atın veya pdf Orijinal Kullanım Kılavuzu indirin. BENDEL 810 010 8 sayfaları. Professional brake piston reset tool set 12-pcs.
Sayfayı Yazdır
7. Position the front and rear pressure plate between the
brake pistons and the caliper frame and push the
brake pistons back with slight lifting movements.
8. Push the release lever forwards in the direction of the
arrow, relax the brake piston tool and pull it out of the
brake caliper.
Modification
How to convert the brake piston tool:
1. Remove the two safety pins and disassemble the
front and rear pressure plates.
2. Insert the ¼ "extension (F) from behind into the plastic
cap of the brake piston tool and push the extension
through the entire tool.
3. Take a feed spring (F) from the tool case and slide it
over the ¼ "square drive of the extension (F)
4. Proceed as mentioned in no. 3 "Application for
floating calipers".
6
Ver. 2004-01