aFe Power 46-20299-B Kullanım Kılavuzu - Sayfa 4

Otomobil Aksesuarları aFe Power 46-20299-B için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. aFe Power 46-20299-B 16 sayfaları.

Figure A

Refer to Figure A for Steps 1-6

Step 1: Park vehicle on level ground and engage parking brake.

Step 2: Remove intake Y-pipe by loosening the three clamps using a 7mm socket or nut driver and

disconnecting the sensor. (Figure A).

Step 3: Disconnect the vent tube by squeezing the retaining clip and pushing it through to release it,

then gently pull it off the intercooler tube. (Figure B).

Step 4: Disconnect the wire harness from the sensor and the factory intercooler tube. (Figure B).

Step 5: Remove the sensor for reuse in your new aFe intercooler tube, using a Torx socket. (Figure B).

Step 6: Loosen the clamp at the throttle body connection, using a 7mm socket or nut driver and

separate the coupling from the throttle body. (Figure B).

Page 4

REMOVAL