Bresser Meteo THBM Colour Kullanım Kılavuzu - Sayfa 11

Hava İstasyonu Bresser Meteo THBM Colour için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bresser Meteo THBM Colour 20 sayfaları.

1. Press the ALERT button for approx. 2 seconds and the current channel symbol starts flashing.

2. Press the +/CH- or -/MEM button to select IN (indoor) or CHANNEL 1-8.

3. Press ALERT button to confirm and continue to the next setting.

4. Settings order: Channel > HI temperature > LO temperature > HI humidity > LO humidity

5. Press the +/CH or -/MEM button to modify the value by 0.1 °C/°F for temperature or 1% for humid-

ity. Press and hold to quick adjust the value.

6. Press the ALARM button to activate or deactivate the Alarm for the currently selected HI/LO Alert.

7. Then finished, press the ALERT button for approx. 2 seconds to return to normal mode.

Silence the alarm

1. When alert is triggered, press the ALARM/SNOOZE, ALARM or ALERT button to stop the alert.

2. If you ignore the alarm, it will stop after 2 minutes by itself.

16 Comfort indication (indoor)

1 too cold

3 too warm

The comfort indication is a pictorial indication based on indoor air temperature and humidity in an at-

tempt to determine comfort level.

Note:

• Comfort indication can vary under the same temperature, depending on the humidity.

• There is no comfort indication when temperature is below 0° C (32° F) or over 60° C (140° F)

This weather station is able to display the moon phases for the northern hemisphere. Here the moon

grows from the right. This is because the sunlit side of the moon in the northern hemisphere moves

from right to left. The following table shows the representations of the moon phases.

2 comfortable

11 / 20