4tronix Ultimate Initio kit Manuel - Sayfa 4

Robotik 4tronix Ultimate Initio kit için çevrimiçi göz atın veya pdf Manuel indirin. 4tronix Ultimate Initio kit 11 sayfaları. For raspberry pi

2. Mounting Obstacle Sensors

Check that each sensor has 2 mounting collars. Screw one onto the body of the sensor,

leaving room at the front for the second one

Push the sensor through from the rear of the mounting bracket and screw on the second

collar. Feed the wires up through the holes in the top plate

Repeat for the second side