4x4 TOUGH 6068 Kullanıcı Kılavuzu - Sayfa 10
Vinçler 4x4 TOUGH 6068 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 4x4 TOUGH 6068 16 sayfaları. 4wd winch
Sayfayı YazdırInstallation
device correctly will void any warranty. The manufacturer will not be held responsible for damage
caused to property or persons as a result of inadequate installation.
MOUNTING YOUR WINCH
1. a)
The winch is to be mounted into a suitable steel mounting frame using the 4 point foot mounting system in either
a horizontal or vertical plane.
b)
It's very important that the winch be mounted on a flat surface so that the three sections (motor, cable drum and
gear housing) are properly aligned.
c)
Before commencing installation ensure the mounting facility being used is capable of withstanding the winch's
rated capacity.
d)
The fitment of winches and / or a frontal protection system may affect the triggering of SRS air bags. Check that
the mounting system has been tested and approved for winch fitment in the airbag equipped vehicle.
2.
Should you wish to manufacture your own mounting plate, the dimensions below will assist. A steel mount plate
6mm thick is recommended. Fasteners should be steel high tensile grade 5 or better. A poorly designed mount
may void warranty.
3.
The winch should be secured to the mounting with 3/8"UNCx1-1/4" bolts and spring washers provided.
4.
The roller fairlead is to be mounted so as to guide the cable onto the drum evenly.
15-6068 12V DC 4WD Winch - Dimensions
(Dimensions are in millimetres)
LUBRICATION INFORMATION
All moving parts in the winch are permanently lubricated with high temperature lithium grease at the time of assembly.
Under normal conditions factory lubrication will suffice. Lubricate cable after each use using light penetrating oil.
Inspect for broken strands and replace if necessary. If the cable becomes worn or damaged it must be replaced.
CABLE INSTALLATION
It is recommended that if the cable needs to be replaced you engage a qualified technician to perform this task.
AUXILIARY ITEMS (not included)
As a further safeguard, you may wish to consider installing the following items:
• An additional isolation switch on the positive lead from your battery to avoid the possibility of malicious use by an
ill intentioned person.
• A second battery to avoid depleting the power of the battery that starts your vehicle, as the use of any winch
draws a considerable amount of power.
10
548
Front view
224
170
254
Top view
124