BENDIX BDW54 Talimat Kitabı - Sayfa 14

Bulaşık Makinesi BENDIX BDW54 için çevrimiçi göz atın veya pdf Talimat Kitabı indirin. BENDIX BDW54 20 sayfaları.

...the wash results are not satisfactory

The dishes are not clean

●

The wrong washing programme has been selected.

●

The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.

●

The spray arms do not rotate freely due to wrong arrangement of the load.

●

The filters in the base of the washing compartment are dirty or incorrectly positioned.

●

Too little or no detergent has been used.

●

Where there are limescales deposits on the dishes; the salt container is empty or the wrong level of the water softener has been

selected.

●

The drain hose connection is not correct.

●

The salt container cap is not properly closed.

The dishes are wet and dull

●

Rinse aid was not used.

●

The rinse aid dispenser is empty.

There are streaks, milky spots or a bluish coating on glasses and dishes

●

Decrease rinse aid dosing.

Water drops have dried onto glasses and dishes

●

Increase rinse aid dosing.

●

The detergent may be the cause. Contact the detergent manufacturer's consumer care line.

If after all these checks, the problem persists, contact your

local Service Force Centre, quoting the model (Mod.), product

number (PNC) and serial number (S.N.).

This information can be found on the rating plate located on

the side of the dishwasher door (see picture).

So that you always have

these numbers at hand, we

recommend you to make a

note of them here:

Mod. : . . . . . . . . . . . . . . . . . .

PNC : . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . .

RA08