Airwell RC5 Programlama ve Kullanım Kılavuzu - Sayfa 8
Uzaktan Kumanda Airwell RC5 için çevrimiçi göz atın veya pdf Programlama ve Kullanım Kılavuzu indirin. Airwell RC5 11 sayfaları. For room air conditioner
Ayrıca Airwell RC5 için: Manuel (8 sayfalar)
Sayfayı Yazdır
AUTO COOLING/HEATING OPERATION
Select the AUTO mode by pressing MODE button (2). Switch to the desired
FAN SPEED or to AUTO FAN by pressing button (3). Select suitable
temperature setting. The air flap will automatically move to either horizontal
air delivery for cooling or to vertical air delivery for heating. At start, the air
conditioner will select its mode of operation according to the room
temperature and the temperature setting.
DRY OPERATION
Select the DRY mode by pressing MODE button (2). Select the suitable
temperature setting. While in DRY mode, the air conditioner will operate at low
fan speed, regardless of the fan setting on the LCD operation display. Fan
might terminate operation from time to time to prevent from over cooling. By
selecting the mode, the air flap will move automatically to optimal horizontal
air delivery position.
SELECTING THE TEMPERATURE
Press TEMP buttons (4) or (5) to change the temperature setting in the LCD
operation display (11). The temperature setting is shown in degrees
centigrade. A higher number indicates a higher room temperature. A lower
number indicates a lower room temperature
SLEEP FUNCTION
Press the SLEEP button (6) to select the SLEEP function. When the sleep
function is activated the air conditioner will be automatically turned OFF after
seven hours. If at the same time TIMER is activated, as well, the air conditioner
will be turned ON and OFF according to the TIMER setting.
To cancel the SLEEP function press on one of the following :
START/STOP button (1)
SLEEP button (6)
7