dymax BlueWave 200 Kullanıcı Kılavuzu - Sayfa 6

Endüstriyel Ekipmanlar dymax BlueWave 200 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dymax BlueWave 200 16 sayfaları. Handheld diaphragm valve
Ayrıca dymax BlueWave 200 için: Hızlı Başlangıç Talimatları (2 sayfalar), Hızlı Başlangıç Talimatları (2 sayfalar), Hızlı Başlangıç Talimatları (2 sayfalar), Hızlı Başlangıç Talimatları (2 sayfalar)

Model 200 Dispensing Valve User Guide

curable adhesives, cyanoacrylates, and anaerobic adhesives. This dispensing valve can

be used for a variety of applications including dot, bead, and potting applications.

Component Description

The Model 200 is comprised of two main sections — the Fluid Section and the Piston

and Lever Section, which are housed all in one Body. The Body of the Fluid Section is

constructed of Delrin® and contains a Teflon® Diaphragm. The Fluid Section and the

Piston and Lever Section are separated by a Diaphragm that is clamped in between the

two sections. The Piston and Lever Section is comprised of an aluminum Top-Cap that

houses a Spring-Loaded Piston. This Piston presses against the Diaphragm to keep the

Valve in the closed position. When the Lever is depressed, the Piston raises off the

Diaphragm allowing the Diaphragm to float upward to dispense fluid through the Body

to the Dispense Tip.

Wetted parts on the Model 200 are made of Delrin®, Teflon®, stainless steel, and

polyethylene.

Figure 1. Model 200 Internal Component Diagram