dymax BlueWave MX-250 Kullanıcı Kılavuzu - Sayfa 7
Endüstriyel Ekipmanlar dymax BlueWave MX-250 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dymax BlueWave MX-250 16 sayfaları. Led flood-curing emitter
Sayfayı Yazdır•
If emitter aperture glass is permanently contaminated it must be replaced for
safe operation.
Mounting/Connections
•
Each emitter has two sets of M3 x 0.5 mm holes (Figure 2) that align with
Dymax stands and holders.
•
When connecting the emitter to the controller, ensure proper strain relief to
prevent pinching or kinking of the interconnect cable.
•
The cooling air intake on top of unit must be free flowing, do not cover.
•
Exhausting air on sides must be given at least 1 mm (0.04") of clear space to
obstructions for safe use.
Figure 2.
BlueWave MX-250 Emitter Dimensions
U S E R G U I D E
B L U E W A V E M X - 2 5 0 E M I T T E R S
|
7