dymax Tridak 1001 Kullanıcı Kılavuzu - Sayfa 9

Endüstriyel Ekipmanlar dymax Tridak 1001 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dymax Tridak 1001 20 sayfaları. Syringe filling system

Sayfayı Yazdır

Preparing the System for Use

Installing the Reservoir Support

1. Place the Reservoir Support on top of the screw hole in the left side of the system base.

2. Using the screw and washer provided, place screw with the washer through hole in base and attach

to Reservoir Support. Tighten the screw until the Reservoir Support is secure (Figure 3).

Figure 3. Reservoir Support Installation

Installing the Material Reservoir

1. Slide the Material Reservoir Retainer (Figure 4, D) over the top of the Reservoir Support (Figure 4, B).

2. Position the Material Reservoir Retainer on the Reservoir Support so that the bottom of the Retainer

is approximately 2 inches above the top of the Back Plate.

3. Using the Height Adjustment Handle (Figure 4, C) tighten the Set Screw until the Material Reservoir

Retainer does not move.

Tridak® Model 1001 Syringe Filling System User Guide