dymax BlueWave MX-275 Kullanıcı Kılavuzu - Sayfa 10
Aydınlatma Ekipmanları dymax BlueWave MX-275 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dymax BlueWave MX-275 20 sayfaları. Emitter
Ayrıca dymax BlueWave MX-275 için: Kullanıcı Kılavuzu (16 sayfalar)
Sayfayı Yazdır
10
BlueWave® MX-275 Emitter User Guide
Unpacking
Upon arrival, inspect all boxes for damage and notify the shipper of box damage
immediately. Open each box and check for equipment damage. If parts are damaged,
notify the shipper and submit a claim for the damaged parts. Contact Dymax so that
new parts can be shipped to you immediately.
WARNING!
controller via the interconnect cable it is susceptible to ESD damage.
Handle it according to ESD standards using a ground strap and do not
touch the exposed connector pins.
The parts below are included in every package/order. If parts are missing from your
order, contact your local Dymax representative or Dymax Customer Support to resolve
the problem.
Parts Included
LED Emitter Assembly
User Guide
Installation
The BlueWave MX-275 emitter is part of the MX-series curing system family of products
and requires connection to a controller via an interconnect cable for proper operation.
Important Information
Do not connect any components while power is applied.
Mount the emitter to a rigid support such as the emitter stand (PN
42390) prior to connecting the interconnect cable to prevent handling
damage.
Do not touch the emitter aperture glass. This can result in poor
performance and broken glass due to heating. Inspect it before each use
and clean with isopropyl alcohol if contaminated.
If the emitter aperture glass is permanently contaminated it must be
replaced for safe operation.
Until the BlueWave MX-275 emitter is attached to a