Dymo LabelManager 350D Kullanıcı Kılavuzu - Sayfa 13
Etiket makinesi Dymo LabelManager 350D için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dymo LabelManager 350D 20 sayfaları. Desktop label maker
Ayrıca Dymo LabelManager 350D için: Hızlı Kılavuz (2 sayfalar)
Sayfayı Yazdır
Storing Formats
In addition to label text, you can store up to nine specific
label formats you use frequently. This feature stores only the
formatting information not the label text.
To store the current format
1.
Press
.
Memory
2.
Use the arrow keys to select
3.
A list of nine fields, which represent memory locations,
are displayed. Fields that contain formats display a name
in the field. You can store new formats in any of the fields,
however, if you select a location that is filled, the previous
label format will be overwritten.
4.
Use the arrow keys to select a field and press
NAME? appears in the field.
5.
Enter a name for the format and press
format is saved and you are returned to the label.
Recalling Stored Labels and Formats
You can easily recall labels and formats stored in memory to
use at a later time.
To recall labels or formats
1.
Press
.
Memory
2.
Use the arrow keys to select
FORMAT, or LAST PRINTED.
3.
A list of memory locations is displayed similar to storing a
label or format.
4.
Use the arrow keys to select a label or format to recall and
H
press
.
2
SAVE and then
.
H
. The word
H
. Your label
RECALL and then LABEL,
Caring for Your Label Maker
Your label maker is designed to give you long and trouble-free
service, while requiring very little maintenance.
Cleaning the Label Maker
Clean your label maker from time to time to keep it working
properly. Clean the cutter blade each time you replace the tape
cassette.
To clean the cutter blade
1.
Turn the power to the label maker off.
A
2.
Press
and the
The message CUT TEST appears on the display.
3.
Press and hold the
F +
4.
When you are able to access both sides of the blade, release
the keys.
5.
Use a cotton bud and alcohol to clean both sides of the
cutter blade.
è
The cutter blade is extremely sharp. Use caution when
cleaning.
6.
After cleaning the blade, press
its home position.
x
You can also follow this procedure if the cutter blade
becomes lodged in the forward position and will not move.
To clean the print head
1.
Remove the tape cassette.
2.
Remove the cleaning tool from inside the label
compartment cover.
3.
Gently wipe the padded side of the tool across the print
head. See Figure 11.
Figure 11
key together.
keys.
to return the blade to
13