GABOR TM-1732 Kullanıcı Kılavuzu - Sayfa 8

Raflar ve Standlar GABOR TM-1732 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. GABOR TM-1732 16 sayfaları. Tilting wall mount for 17-32 flat panel screens

Sayfayı Yazdır

STEP 2:

Positioning Mounting

Bracket Directly On Wall

•

After confirming height

positioning is appropriate

by marking wall with a

pencil, hold wall mount

of mounting bracket

firmly against wall and

use pencil to mark exact

location of drill holes,

using a bubble level to

ensure a proper balance.

•

Drill all 3 bolts into

holes using appropriate

washers and/or anchors,

leaving only a few

threads of bolt showing;

Installation Instructions

insert bolts through

large mount holes and

verify that they can

slide downwards into

smaller hole areas found

above (see sidebar for

specific mounting details

regarding sheetrock and

concrete walls).

•

To ensure wall mount

is not being installed

upside down, verify that

oversized rounded hole is

positioned on the

upper part of mount.

•

Remove wall mount

from bolts and proceed

to Step 3.