Dymo LabelPoint 150 Kullanıcı Kılavuzu - Sayfa 8
Etiket makinesi Dymo LabelPoint 150 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dymo LabelPoint 150 11 sayfaları. Multifunctional basic handheld model
Ayrıca Dymo LabelPoint 150 için: Kullanıcı Kılavuzu (15 sayfalar), Hızlı Kılavuz (2 sayfalar)
Sayfayı Yazdır
Troubleshooting
Review the following possible solutions if you encounter a problem while using your labelmaker.
Problem/Error Message
No display
Poor Print Quality
Poor Cutter Performance
Printing
Too many characters
Exceeded maximum number of characters in buffer.
Too many lines
Exceeded maximum number of lines allowed.
Insert Tape Cassette
Tape cassette missing or empty.
Battery low
Batteries almost discharged.
Tape Jam
Motor is stalled due to tape jam.
Set
Fixed-length label selected and the length necessary to
print the label exceeds the selected length.
If you still need assistance, contact DYMO Customer Support. Refer to
to locate the contact number for your country.
Documentation Feedback
We are constantly working to produce the highest quality documentation for our products. We welcome your feedback.
Send us your comments or suggestions about our user guides. Please include the following information with your
feedback:
• Product name, version number, and page number
• Brief description of content (instructions that are inaccurate or unclear, areas where more detail is needed, and so on)
We also welcome your suggestions about additional topics you would like to see covered in the documentation.
Send email messages to: [email protected]
Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please
contact Customer Support.
10
Solution
• Ensure the labelmaker is turned on.
• Replace discharged batteries.
• Replace discharged batteries or attach power adapter.
• Ensure tape cassette is installed properly.
• Clean the print head.
• Replace the tape cassette.
Clean the cutter blade. See Caring for Your Labelmaker
No action required.
Message disappears when printing is finished.
Delete some or all of the buffer text.
Select another format.
Insert a new tape cassette
Replace batteries or connect AC power adapter.
• Remove jammed tape and replace tape cassette.
• Clean cutter blade.
• Following this message, a fixed-length value is
displayed which indicates the minimum label length
necessary to fit the text. Do one of the following:
• Adjust the fixed-length label setting appropriately, or
• Select a narrower font size.
Contacting Customer Support
.
on page 51