AFF 202LCJ Kullanıcı El Kitabı - Sayfa 5

Jacks AFF 202LCJ için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AFF 202LCJ 13 sayfaları. 2-ton long chassis floor jack — super duty

OPERATING INSTRUCTIONS

Before use ensure you have read and understood Section 2, Safety Information.

IMPORTANT

Before use, the operator is to visually inspect the jack for cracked welds, damaged or missing parts or hydraulic leak.

5.1

RAISING A VEHICLE

5.1.1

Ensure that the jack and the vehicle are on a hard, level surface.

5.1.2

Always ensure that the vehicle handbrake is engaged and that the vehicle wheels are chocked.

5.1.3

Consult the vehicle manual to determine the location of jacking points.

Position the jack under a suitable lifting point.

5.1.4

Turn the handle clockwise, to close release valve. DO NOT over-tighten.

5.1.5

Raise the vehicle to the desired height by pumping the handle up and down.

5.1.6

Immediately support the vehicle with appropriate means such as vehicle support stands.

5.1.7

Turn the release valve slowly counter-clockwise to lower the vehicle on to the vehicle support stands.

5.2

LOWERING A VEHICLE

5.2.1

Ensure that the area under and around the vehicle is clear of people and obstructions.

5.2.2

Turn the release valve clockwise to close it.

5.2.3

Pump the handle to raise the vehicle off the vehicle support stands.

5.2.4

Remove the vehicle support stands from beneath the vehicle.

5.2.5

Turn the release valve slowly counter-clockwise to lower the vehicle to the ground.

NOTE: When the jack not in use, ALWAYS leave the saddle and ram fully retracted.

CAUTION: Keep hands and feet away from the hinge mechanism of the jack.

IMPORTANT: Only fully qualified personnel should attempt maintenance or repair.

affjaxx.com