AFF 400SS Kullanıcı El Kitabı - Sayfa 7

Jacks AFF 400SS için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. AFF 400SS 12 sayfaları. 4-ton heavy-duty trolley jack

6.3.3

With the jack in the level position, remove the oil filler plug.

6.3.4

The proper oil volume should be no more than 13 mm from the top of the oil tank to the oil surface. If it is too low,

please add high-quality hydraulic oil according to Section 6.4.

6.3.5

Replace the oil filler plug.

6.3.6

After adding oil, please check if the jack can reach the maximum height with seven pumps; if not, please purge air from

the hydraulic unit as required. Refer to Section 4.

6.3.7

Cover the top plate, making sure the four grooves in the top plate line up with the four retaining screws as per the

following picture. Then tighten the four screws.

6.4 ADDING OIL

6.4.1

Fully retract the ram by turning the release valve counterclockwise.

6.4.2

Loosen the four top plate retaining screws (no need to screw out) and remove the top plate vertically as pictured below.

Undo the retaining screw

6.4.3

With the jack in the level position, remove the oil filler plug.

Remove the top plate

affjaxx.com