Benedini TBS Mini V2 Manuel - Sayfa 12
Sigara içenler Benedini TBS Mini V2 için çevrimiçi göz atın veya pdf Manuel indirin. Benedini TBS Mini V2 13 sayfaları. Digital multifunctional rc-soundmodule
Ayrıca Benedini TBS Mini V2 için: Kullanım Kılavuzu (7 sayfalar)
Sayfayı Yazdır
6. Configuration of the soundunit by the optional programming cable and a
common PC
Please see the separate manual for the configuration software called "TBS Flash".
The manual as well as the software is available free of charge at www.benedini.de.
Note:
The sound unit must be powered from the receiver or a receiver battery while being connected to
the PC. It is NOT powered by the USB cable!
7. Technical datas
Power supply:
Internal amplifier:
Switching outputs:
Dimensions:
Weight:
- You must do a range check of your remote control with running sound system !
- Ensure a proper working radio under ALL conditions !
- Receiver Power supply:
If a speed controller BEC is used for powering the receiver, it is highly recommended using a
separate servo Y-cable for connecting the receiver to the ESC and the TBS Mini (speed channel).
In this case the receiver is powered directly and not via the two Prop1 connectors of the TBS Mini.
Maximum current of the Prop1 connectors are 2A, if according wires are used!
- The switching outputs of the TBS Mini MUST not be used to trigger any dangerous actions in the
model (f.e. triggering any firing mechanisms)
Disclaimer
a.)
www.benedini.de provides the equipment solely to be used by each purchaser in accordance with the specific
instructions supplied with each Sound Module and that the purchaser undertakes that the Sound Module and any
associated equipment e.g. Amplifier, Speakers, etc. will be operated within the parameters contained therein.
b.)
www.benedini.de accepts no liability for any damage to any Sound Module if it is determined that the damage has
been caused by either non adherence to the instructions or due to any malfunction by any cause or reason whatsoever
within the model or its equipment and thereby outside of the control of www.benedini.de.
c.)
www.benedini.de supplies each Sound Module on the strict undertaking that it will be used in such a manner to
comply with the laws of the purchaser's country of residence.
d.) www.benedini.de has no control over the final assembly, no liability shall be assumed nor accepted for any damage
resulting from any use by user of the final assembled product, the user accepts all resulting liability.
Technical changes reserved
TBS Mini V2, 11/2018
max. 6V
3,5V –
(powered from the receiver)
3W at 4 Ohm and 5V supply
Negative switching, max. 12V/0,5A each
55 x 28 x 10mm
about 6g
!!!! SAFETY ASPECTS !!!!
Benedini Modellbauelektronik
Müllergasse 15, 52159 Roetgen, Germany
Web: www.benedini.de
Mail: [email protected]
Not suitable for children under 14 years
www.benedini.de
Page 12 of 13