Dymo M1011 Kullanıcı Kılavuzu - Sayfa 10

Etiket makinesi Dymo M1011 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dymo M1011 16 sayfaları. Rhino
Ayrıca Dymo M1011 için: Kullanıcı Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (14 sayfalar)

Sayfayı Yazdır

Centering the Text on the Label

The trailer length guide (N) has positioning marks for a short (S) or long

label (L). Use the marks on the guide to center the text on your label.

To center the text on a long label

1. After cutting the previous label, emboss the text on a new label.

2. Pull the trailer length guide (N) to the forward position.

3. Advance the tape until the last embossed letter is opposite the L on the

guide. The label has a leader/trailer of approximately 5 cm (2") and the

text is centered.

4. Lift the cutting handle (I) to the vertical position to cut the label.

To center the text on a short label

1. Retract the tape until the tape edge is at start line (D).

2. Emboss the text on your label.

3. Advance the tape until the last embossed letter is opposite the S on the

guide. The label has a leader/trailer of approximately 3 cm (1.5") and

the text is centered.

4. Lift the cutting handle (I) to the vertical position to cut the label.