Dymo Rhino 5200 Hard case Kit by Kullanıcı Kılavuzu - Sayfa 3
Etiket makinesi Dymo Rhino 5200 Hard case Kit by için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dymo Rhino 5200 Hard case Kit by 14 sayfaları. User guide
Sayfayı Yazdır
About Your New Printer
With your new DYMO RhinoPRO
you can create a wide variety of high-quality, self-
adhesive labels. You can choose to print your
labels in many different sizes and styles. The
printer uses DYMO RhinoPRO Industrial label
cassettes in widths of 6 mm (1/4"), 9 mm (3/8"),
12 mm (1/2"), or 19 mm (3/4"). RhinoPRO label
cassettes are also available in a wide range of
materials.
Visit www.dymo.com for information on obtaining
tapes and accessories for your printer.
Warranty Registration
pe
Please complete the warranty registration card and
return it to the appropriate address, or you can
register online at www.dymo.com.
Getting Started
Follow the instructions in this section to print your
first label.
Power Supply
The printer is powered by standard batteries, a
rechargeable battery pack or an AC power adapter.
To save power, the printer will automatically turn off
after five minutes of inactivity.
Inserting the Batteries
The printer uses six AA batteries.
To insert the batteries
1. Press the thumb latch on the bottom of the
printer to open the battery compartment door.
See Figure 1.
2
Manual_RhinoPRO5000_WEU.indd 3
™
5000 printer,
2. Insert the batteries following the polarity
markings (+ and –).
3. Close the battery compartment door.
used for a long period of time.
Using the Battery Pack
An optional, rechargeable battery pack can be
used to power the printer. The battery pack can be
purchased through your local DYMO reseller.
The printer must be connected to external power
through the AC adapter and turned ON to charge
the battery pack. When the battery pack is
completely discharged, allow four to five hours to
fully charge the battery.
battery charging indicator may continue to display
even though the battery pack is fully charged.
To use the battery pack
1. Open the battery compartment door.
2. Insert the battery pack following the polarity
markings (+ and –). See Figure 2.
Figure 1
Remove the batteries if the printer will not be
When connected to external power, the
Figure 2
GB
Press thumb
latch
3
3
23-07-2004 10:51:10