GAC IGC700 Series Manuel - Sayfa 12
Kontrolör GAC IGC700 Series için çevrimiçi göz atın veya pdf Manuel indirin. GAC IGC700 Series 18 sayfaları. Integral governor control
PERFORMANCE
Isochronous Operation & Steady State Stability.............................................±0.25% or better
Speed Range/Governor..............................................................................400 – 10KHz
Speed Drift with Temperature...............................................................< ± 1% Maximum
Idle Adjust.................................................................................Full Range of set speed
Droop Range.................................................................................1 – 17% Regulation
Speed Trim Range........................................................................±5% of Running Speed
ENVIROMENTAL
Ambient Operating Temperature Range............................................................-40
Relative Humidity.......................................................................................Up to 95%
All Surface Finishes...................................................Fungus Proof and Corrosion Resistant
INPUT / OUTPUT PARAMETERS
Supply..............................................................................12 or 24Vdc Battery Systems
.................................................................................(6.5Vdc to 33Vdc Nominal)
Polarity........................................................................Negative Ground (Case Isolated)
Power Consumption..........................................70mA max. continuous plus actuator current
Actuator Current Range@ 25
Speed Sensor Signal........................................................................0.5-120 Volts RMS
Discrete Outputs (Alarm/AUX......................................................Sink up to 500mA@25ºC
CONFIGURATION PARAMETERS
Flywheel Teeth.............................................................................................50 – 250
Range (Gain and Stability Multiplier) .....................................................................1,2,3
Fixed Speed settings.................................................................................0-Max RPM*
Variable Speed settings..............................................................................0-Max RPM*
Overspeed Setting....................................................................................0-Max RPM*
Starting Fuel Preset....................................................................................0-Max Fuel
RELIABILITY
Vibration.............................................................................................7G@20-100Hz.
Testing.................................................................................100% Functionally Tested
PHYSICAL
Dimensions.................................................................................9.6cm x 9.6cm x 3.7cm
..............................................................................(3.765 x 5.55 x 1.44 inches)
Weight................................................................................................0.64kg (1.41lbs)
Mounting........................................................................Panel Mounted, vertical preferred
Sealing.................................................................................IP 54, using optional gasket
*Note:
SPECIFICATIONS
.........................................................(-40° to +180°F)
o
C (77°F) – (Inductive Load) ..................Max. 10 Amps continuous
-Max RPM is based on the Flywheel Teeth.
-RPM=Frequency*60/FlywheelTeeth.
-Maximum frequency is 10,000 Hz.
12
o
o
to 85
C