GAD BLACKY Kullanım Kılavuzu - Sayfa 5

DJ Ekipmanları GAD BLACKY için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. GAD BLACKY 7 sayfaları. The professional projection shutter for theater, concert, stage and multimedia performance

Sayfayı Yazdır

e) Installation on a Projector

BLACKY can be placed in practically any conceivable position in front of the projector lens. The

standard position is strapped on top of the projector with the included tension belt. When hanging the

projector, BLACKY can also be strapped underneath. Take care to pull the tension belt through the

handles and use a safety cable to help prevent accidents.

f) Shutter Installation

Make sure that the DMX channel is OFF or that the LED on the remote control is out and not red,

indicating that the unit is closed. Make sure at this time that neither the DMX channel nor the remote

control switch is inadvertently activated.

Now mount the shutter on the shaft with a spacing of ca. 15-20 mm in front of the projector lens. It is

important to note that there should be no interference or obstruction to the shaft.

On the front side of the shaft is a countersink which fits exactly in the slot of the shutter plate!

Place the washer inside the knurled screw to prevent any slippage.

3) Safety Precautions

When used with a hanging projector a safety cable should be attached through BLACKY's handle.

Installation should only be undertaken when the device is disconnected to the power supply. To avoid

injury take care that no one obstructs the shutter during operation.

BLACKY may only be used with lighting devices that are fan-cooled. Using it with hot lights, etc. is

potentially dangerous and is a possible fire hazard.

It is important during installation to ensure that the shutter has ample space to open and close properly.

Hinderances to the shutter could cause damage to BLACKY or surrounding structures.

Damages due to false installation and other negligence on the part of the customer are not covered by

the warranty.