Dymo LabelWriter 450 Nasıl Yapılır Kılavuzu

Yazılım Dymo LabelWriter 450 için çevrimiçi göz atın veya pdf Nasıl Yapılır Kılavuzu indirin. Dymo LabelWriter 450 3 sayfaları. How to order and insert a roll of labels in the dymo labelwriter
Ayrıca Dymo LabelWriter 450 için: Hızlı Başlangıç Kılavuzu (20 sayfalar), Hızlı Başlangıç Kılavuzu (14 sayfalar), Genel Bakış (2 sayfalar), Kurulum Kılavuzu (11 sayfalar), Hızlı Başlangıç Kılavuzu (10 sayfalar), Kullanıcı Kılavuzu (19 sayfalar), Kurulum Kılavuzu (16 sayfalar)

How to Order and Insert a Roll of Labels in the DYMO LabelWriter

The DYMO LabelWriter can accommodate multiple sizes of labels; the symplr® System prints

the Vendor / Guest day pass on the Shipping Label size and the roll contains 220 labels. The

labels can be ordered under a contracted price through ____________.

Item-DYMO® Label Writer® 30911 Time Expiring Adhesive Name Badge Labels

1. Remove the label spool from inside the top cover and pull the spool guide from the spindle.

2. Hold the spool spindle in your left hand and place the label roll on the spindle so that the labels feed

from underneath and the left edge of the label roll is firmly against the side of the spool. See Figure

5 below.

3. Slide the spool guide onto the right side of the spool and press the guide tightly against the side of

the label roll, leaving no gap between the roll and the spool. See Figure 6 below.

(models 450 & 450 Turbo)