Gadgetfreakz Digital Alarm Clock HD SPY DVR Kullanım Kılavuzu - Sayfa 4

Çalar Saat Gadgetfreakz Digital Alarm Clock HD SPY DVR için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Gadgetfreakz Digital Alarm Clock HD SPY DVR 7 sayfaları.

Sayfayı Yazdır
III. Handling Instructions
1.
Open the rotational cover at the right side, insert the TF card and turn "ON" to
2.
Use the remote controller to aim to the receiver of the clock and press "
is on and the clock is under the stand by
3.
Press
to
start recording
stop pressing
, it will save the video file and return to the "holding state" , and the blue lamp will be on
(the default time length for video recorded is 20 minutes).
4.
Press
button to start recording a sound; after the blue lamp flashes 3 times and turns off, it will be put
into the working order; Press
the blue lamp will be on (the default time length for sound recorded is 20 minutes);
5.
Press
button to get in photo taking
pressing this button, the blue lamp will flash; after taking the photo, it will return to the stand by.
6.
Press
button to get in motion detection mode, then the blue lamp will flash
is detected, the blue lamp will flash slowly by two times and the device will be start to record video. If there
is no moving object to be detected, the blue lamp will return to "Quick-flash:
mode
(the
default length for the video file is 3
7.
Press
button, it will turn the device off and the blue lamp will be off.
8.
When the switch is "ON", insert the USB cable and then press
device will access to the U-disc mode.
9.
PC camera function: Please install the driver software which is saved in the Compact Disc before
operating;
Turn on the device by pressing
of
"ON", insert USB cable to connect the computer; at this time, it will access to PC CAM mode;
10. Charging: Place the chief switch to "OFF" position, insert USB adapter, and the red lamp will be on;
it is
full, the red lamp will be off.
use only the adapter provided with the device together; if the device getting hot or occurs other
unexpected situations whilst charging, please disconnect the adapter's power source);
11. Reset:
If the product stops working under illegal operation or other unclear
switch of the device to "OFF" position, and then to "ON" position.
12.
When the battery is low
Then please charge it immediately.
13.
Recorder date: Run the writertime file( in CD disc) when the camera connect with computer. And then ,the
video time is the same computer.
14. File update: please install "Network Installer" from the installation disc; use the remote controller to open
the clock, and then insert the USB cable in 10 seconds; afterwards, the computer will open an interface
automatically; click "Program Upgrade", it will open a dialogue box; afterwards click "Update".
When ① DRAM Timing, select 0X35
When ② DRAM Size, select "8M"; afterwards, press "OK" to upgrade; several minutes later, press
"Confirm" button.
15.
When the program is lost, please install the software which is saved in the Compact
"STK02NU Programme Upgrading Tool", afterwards click "Update";
Under ① DRAM Timing, select 0X35
Under ② DRAM Size, select "8M"; afterwards, press "OK" to upgrade; several minutes later, press
"Confirm" button.
IV. File's storage and play
When finishing video-recording and other operations, please place the switch to "ON"
position,
connect it to your computer by USB
controller; copy the file or cut and paste it to the your computer to play; or
the TF card and use the card reader to read the data inside.
The Media player / KM player is recommended.
mode.
video. After the blue lamp flashes 3 times and then turns off, it start recording.
again, it will save the sound file and return to the "holding state" , and
mode.
minutes);
on the remote controller when the device is under the mode
You can charge it too by connect this device to a computer
capacity, the blue lamp will keep flashing or the screen display will be unclear.
If it is used off, the file will be saved automatically;
It will take a photo if pressing this button
button on the remote controller, the
It will reset the product accordingly;
cable, and press
get ready.
" to start.
When the blue lamp
again. When
quickly. If a moving object
and get in motion detection
When
(
Please
reasons, please place the
Disc, and then click
on the remote
you can remove