AFF Flanders AstroPure 1000-IR Hızlı Başlangıç Kılavuzu - Sayfa 2

Hava Temizleyici AFF Flanders AstroPure 1000-IR için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. AFF Flanders AstroPure 1000-IR 2 sayfaları. Portable air purification systems

Sayfayı Yazdır

Important notes:

•

Prior to operating this AstroPure air purification system, please read and

observe all safety and installation instructions provided in the Introduction

and Installation Instructions section of the Installation, Operation, and

Maintenance (IOM) manual that came enclosed with the system.

•

This guide is meant to expedite setup and operation of the system following

installation and using the default settings.

•

For more detailed information on setting up, operating, and maintaining this

system, please consult the IOM manual or contact

[email protected].

After completion of installation, turn on the power switch located on the

back of the unit.

a. The unit is preset to 60% of maximum power.

b. To make adjustments to the CFM settings, refer to the EC Motor

Speed Adjustment section of the IOM manual.

When the power cord is plugged into a wall receptacle, and the power

switch is in the ON position, the control panel (HMI) will sound an

audible confirmation and illuminate.

The system starts with the fan in the OFF position. To turn it on, press

the red power button that is part of the control panel (HMI) on the top of

the unit.

a. The EC motor may require time to ramp up to full operating

speed (RPM).

b. If the motor does not seem to be running upon turning on the unit,

allow ten (10) seconds for the motor to get up to full operating

RPM. If nothing happens, go to the troubleshooting section in the

IOM manual.