AirCom MG Series Kullanım Kılavuzu - Sayfa 10

Boya Püskürtücü AirCom MG Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. AirCom MG Series 17 sayfaları. Special spray guns

Sayfayı Yazdır
MG series

TROUBLESHOOTING

Anomaly
No atomization
Leakage from the
nozzle
10 - Instruction Manual
Problem / Solution
No pressure is getting to the gun
Check air system
Gaskets part. [O5] worn out
Replace gaskets part. [O5] worn out
The head part. [1286-D4-M0] or part. [1286-
D4-M1], nozzle part. [1007-2] and rod part.
[1286-D5] are worn out.
Replace the head part. [1286-D4-M0] or part.
[1286-D4-M1], nozzle part. [1007-2] and rod
part. [1286-D5]
The product is exceeding the amount needed
Reduce the product passage
Lack of product (flow rate too low)
Add product or reduce atomization air pressuree
Missing product in tank or clogged pipes
Fill tank or clean up with solvent
Handwheel part. [1286-D11] worn out
Replace handwheel part. [1286-D11] worn out
aircom.it
EN