Active Motif 53080 Manuel - Sayfa 5

Tıbbi Ekipman Active Motif 53080 için çevrimiçi göz atın veya pdf Manuel indirin. Active Motif 53080 15 sayfaları. Cooled sonication platform

Included Components

The Cooled Sonication Platform is supplied with the following components.

• Sound enclosure with measurements of 28" H (with chimney) x 14.25" W x 12" D (711 mm x

362 mm x 305 mm)

• Probe chimney

• Sonication platform

• Choice of a 1.5 ml, 15 ml or 50 ml Tube Cooler

• Alignment tool

• 3 hex wrenches

• Alternate spring bracket with set screw (optional; see below)

Alternate spring bracket

The alternate spring bracket (shown below) is not normally needed. It was supplied in case you

need to remove the converter/probe bracket from the top of the rod. You would need to do this

only if your converter/probe is too large to be held by the bracket. See Appendix – Section A

for instructions on how to remove the converter/probe bracket and replace it with the alternate

spring bracket.