Active Products PW0501400 Kullanım Kılavuzu - Sayfa 7

Basınçlı Yıkama Active Products PW0501400 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Active Products PW0501400 16 sayfaları. 1200 everyday pressure washer

Active Products PW0501400 Kullanım Kılavuzu

ASSEMBLY AND OPERATING INSTRUCTIONS

Caution
• Never use the pressure washer to draw
in water contaminated with solvents
(e.g. paint thinners, gasoline, oil, etc.).
• Dirt in the feed water will damage the
unit. To avoid this risk, we recommend
checking the water filter (located inside
the water inlet; to clean it out see
Maintenance section).
• Always prevent debris from being
drawn into the unit by using a clean
water source and an accessory water
filter if required.
Fig.1
Step 1
Make sure that the ON/OFF switch is in the
"OFF" position.
Fig.3
Step 3
Insert the wand into spray gun, and twist 1/4 turn until rectangular tab appears.
Water Supply (cold Water Only)
Do not draw non-water liquids through the unit. For
use with cold water supply only.
Water hose must be at least a 1/2" in diameter.
Flow rate of water supply must not fall below 2 GPM
(gallons per minute).
Flow rate can be determined by running the water
for one minute into an empty 5-gallon container.
The water supply temperature must not exceed
40°C (104°F).
Caution
To prolong the life of the unit, it is
recommended to rest the unit 5 minutes
after every 30 minutes of use.
Step 2
Separate the adaptor and quick-connect
coupling. Attach inlet adaptor to the machine's
inlet and attach the quick-connect coupling
onto the garden hose.
Fig.2
5