Gage Bilt GB704SH Manuel - Sayfa 9

Araçlar Gage Bilt GB704SH için çevrimiçi göz atın veya pdf Manuel indirin. Gage Bilt GB704SH 13 sayfaları. Installation tool

HEAD

WARNING:

Dispose of hydraulic oil in accordance with applicable regulations.

Remove nose assembly from tool before attempting disassembly of head assembly.

Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704182). Be careful not

to damage threads or cause burrs on polished piston (704507) surface.

The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the

four socket-head cap screws (400061) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).

GB704SH S/N: 1089 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

401080 - BACK-UP RING

204304 - SWIVEL ASSEMBLY

403764 - O'RING

Rev 3/15