Gage Bilt GB735 Talimatlar Kılavuzu - Sayfa 4

Araçlar Gage Bilt GB735 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Gage Bilt GB735 20 sayfaları.

WARNING:

Any other use is forbidden.

The GB735 is a pneumatic-hydraulic tool designed specifically for the efficient installation of blind rivets. It weighs 5.70 lbs. (2.6 kg)

and can be operated in any position. It has a 1.135" (28.8 mm) fastener setting stroke and a rated pull load of 2,300 lbs. (10.2 kN) with

90 psi (6.2 bar) air pressure at the air inlet.

The GB735 installation tool operates on 90 to 100 psi (6.2-6.9 bar) Max. with 90 psi. (6.2 bar) providing the maximum efficiency. At 90

psi (6.2 bar) of air pressure, the GB735 does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).

The air inlet has a 1/4-18 female pipe thread to accept the users air hose fitting.

NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (SEE NOSE ASSEMBLY SELECTION

CHART ON PAGE 18).

WARNING:

Do not operate in an explosive atmosphere.

The GB735 can be operated between 0ºF - 118º (-17.8ºC / 47.8ºC)

GB735 INSTALLATION TOOL

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

- 5.70 lbs. (2.6 kg)

Air pressure req'd

- 90-100 p.s.i. (6.2-6.9 bar) Max.

Air consumption

- .16 SCF/cycle (4.53 L/cycle)

Hydraulic oil

- Automatic Transmission Oil,

Setting stroke

- 1.135" (28.8 mm)

Rated pull load

- 2,300 lbs. (10.2 kN)

Noise level

- 81.5 dB(A)

Vibration

- Tested– No Hazards Found

Dexron® III, or equivalent.

REV. 12/22