Gage Bilt GB585NT Kullanıcı Kılavuzu - Sayfa 8

Elektrikli Alet Gage Bilt GB585NT için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Gage Bilt GB585NT 8 sayfaları. Installation tool

HIGH TENSILE PULL TYPE
BLIND OVERSIZE MANDREL
C50L® AND HP8® ARE REGISTERED TRADEM ARKS OF ALCOA INC.
*FOR NON-PRODUCTION APPLICATIONS ONLY.
1) POWER UNIT REQUIRES ADUSTMENT TO 7,200 PSI FOR PULL AND 4,000 PSI FOR RETURN.
MAGNA-GRIP® IS A REGISTERED TRADEMARK OF ALCOA. LOCTITE® IS A REGISTERED TRADEMARK OF LOCTITE CORPORATION. TEFLON® IS A REGISTERED TRADEMARK OF E.I. DUPONT
DE NEMOURS C. LUBRIPLATE® IS A REGISTERED TRADEMARK OF FISKE BROTHERS REFINING C. SLIC-TITE® IS A REGISTERED TRADEMARK OF LA-CO INDUSTRIES INC.
GB585NT - SELECTION CHART
FASTENER
LOCKBOLT
C50L®
HP8®
MHP 10.9
NOSE ASSEMBLY KEY
20-585-41
A ~The first set of numerical digits represent the diameter of the fastener in 32nds of
an inch (20/32)
B ~The second set of digits represent ONE of the tool models which MAY be used
with this head (Model 585)
C ~The last set of numerical digits signify the "Gun Line," or reach of the pulling head
to the nearest tenth of an inch. (41 is 4.1 inch "Gun Line")
Seller warrants that all goods covered by this catalog will conform to
applicable specifications and will replace, or repair, F.O.B. our plant, any
goods providing defective from faulty workmanship, or material, for 90 days
from date of shipment.
Said warranty to remain in effect if and only if such goods are used in
accordance with all instructions as to maintenance, operation, and use set
forth in manuals and instruction sheets furnished by seller.
Sellers obligation under this warranty shall be limited to the repair or
rework of the goods supplied or replacement thereof, at Seller's option, and in
no case is to exceed the invoice value of said goods. Under no circumstances
will seller be liable for incidental or consequential damages or for damages
incurred by the buyer or subsequent user in repairing or replacing defective
goods or if th e goods covered by this warranty are reworked or subjected to
any type of additional processing.
This warranty is void if Seller is not notified in writing of any rejections
or defects within 90 days after the receipt of the material by the customer.
THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY.
DIA.
5/8"
3/4"
5/8"
3/4"
5/8"
3/4"
16mm
*20mm
1
WARRANTY
NOSE ASSEMBLY
20-585-41
24-585-46
BOM20-585-41
BOM24-585-46
HP20-585-41
HP24-585-46
HP20-585-41
HP20MM-585-46
4/11
Rev. 4/11