Gage Bilt GB713 Orijinal Talimat Kılavuzu - Sayfa 4
Elektrikli Alet Gage Bilt GB713 için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Gage Bilt GB713 20 sayfaları.
Ayrıca Gage Bilt GB713 için: Kurulum Kılavuzu (14 sayfalar), Orijinal Talimat Kılavuzu (18 sayfalar)
Sayfayı Yazdır
WARNING:
Any other use is forbidden.
The GB713 is a pneumatic-hydraulic tool designed specifically for the efficient installation of blind rivets. It weighs 6.50 lbs. (2.9 kg)
and can be operated in any position. It has a .760" (19.3 mm) fastener setting stroke and a rated pull load of 4,500 lbs. (20.0 kN) with
90 psi (6.2 bar) air pressure at the air inlet.
The GB713 installation tool operates on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi (6.2 bar) providing the maximum efficiency.
At 90 psi (6.2 bar) of air pressure, the GB713 does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The air inlet is provided with 1/4-18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on pg. 18 for nose assembly recommendations).
WARNING:
Do not operate in an explosive atmosphere.
The GB713 can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
GB713 Installation Tool
DESCRIPTION
ENVIRONMENTAL USE
SPECIFICATIONS
Hand Held Weight
- 6.50 lbs. (2.9 kg)
Air pressure req'd
- 90-100 p.s.i. (6.2-6.9 bar)
Air consumption
- .30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
- Automatic Transmission Oil
Setting stroke
- .760" (19.3 mm)
Rated pull load
- 4,500 lbs. (20.0 kN)
Noise level
- 81.5 dB(A)
Vibration
- Tested– No hazards found.
Dexron III, or equivalent.
4
7/11 REV 5/22