Gage Bilt GB510ABOM Orijinal Talimat Kılavuzu - Sayfa 18

Perçin Aletleri Gage Bilt GB510ABOM için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Gage Bilt GB510ABOM 20 sayfaları. Installation tool

Sayfayı Yazdır

Approved for use on Gage Bilt CE installation tools and/or other manufacturer's CE approved tools of similar design.

The GB912 Hydraulic Powerunit is a portable power source designed to operate a wide range of hydraulic installation tools. The unit air pow-

ered, air actuated and delivers up to 10,000 psi (689.48 bar) working pressure. The actuator on the installation tool remotely controls the hydrau-

lic oil directional flow. The unit consists of a two position air hydraulic pump, four way control valve and relief valve mounted on the reservoir.

The rapid tool piston movement is obtained through a higher (12 cubic inches a minute) output pump. Quick disconnect hydraulic couplings

and air control socket are included to attach the equipment hydraulic hoses and air control tube.

The GB912 Hydraulic Powerunit is available separately or in kits including hydraulic quick-disconnect couplers, air connectors, air lines and

hydraulic hoses in various lengths.

GB510BOM/GB510ABOM INSTALLATION TOOL: S/N 1001 AND ABOVE

CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS

Accessories.

GB912 HYDRAULIC POWERUNIT

(Sold Separately)

GB912-12 includes the GB912 Powerunit and 12 ft. (3.7m) Hose Kit-Air, part #910701.

GB912-26 includes the GB912 Powerunit and 26 ft. (7.9m) Hose Kit-Air, part #910705.

GB912-38 includes the GB912 Powerunit and 38 ft. (11.6m) Hose Kit-Air, part #910709.

GB912-52 includes the GB912 Powerunit and 52 ft. (15.8m) Hose Kit-Air, part #910714

Image may not reflect actual tools

(Sold Separately)

11/20 REV 121/22