Gage Bilt GB808V Orijinal Talimat Kılavuzu - Sayfa 4

Taşınabilir Jeneratör Gage Bilt GB808V için çevrimiçi göz atın veya pdf Orijinal Talimat Kılavuzu indirin. Gage Bilt GB808V 20 sayfaları.

WARNING:

Any other use is forbidden.

The GB808V series pneudraulic pump is designed to work in conjunction with Gage Bilt's split handle (SHA) or split riveter (SRA)

fastener installation tools. When the GB808V is properly configured with the correct installation tool, it is capable of installing

3/32" (2.38mm) - 1/4" (6.35mm) fasteners.

It is designed specifically to improve on the ergonomic and efficiency of fastener installation. The GB808V series pump operates using

90 - 100 psi (6.2 - 6.9 bar) of air and can install a wide range of fasteners when fitted to the appropriate installation tool. The GB808V

Series powerunit can be configured to operate one or more tools simultaneously. The GB808V Series powerunit can also be configured

to hang, roll with wheels, or to include a vacuum system to collet spent pintails.

WARNING:

Do not operate in an explosive atmosphere.

The GB808V Series Powerunit can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)

GB808V POWERUNIT

DESCRIPTION

ENVIRONMENTAL USE

TECHNICAL SPECIFICATIONS

Weight

Air Pressure req'd

Hyd. pressure req'd

Air consumption

Hydraulic oil

Noise level

Vibration

The tool & pump combination emits no sound except when firing a fastener. The tool & pump

combination emits 92.5 dB(A) for less than 0.5 seconds.

- 48 lbs. (21.8 kg)

- 90 - 100 psi (6.2 - 6.9 bar)

- 4,000 lbs. @ 90 psi (6.2 bar)

- 0.5 CF

- AW-32 or equivalent

- 81.5 dB(A)

- No hazard identified

REV. 2/23