5th Wheel M2 Montaj Talimatları Kılavuzu - Sayfa 5
Scooter 5th Wheel M2 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. 5th Wheel M2 19 sayfaları.
Ayrıca 5th Wheel M2 için: Kullanıcı Kılavuzu (18 sayfalar)
Sayfayı Yazdır
Experience
LED PROTECTION FILM
Scan code and install
5th Wheel app
LED Display
Battery| Gears | Speed | Status
Switch button is located at the bottom
LED Display
right of the display：
Battery| Gears | Speed | Status
Switch button is located
at the bottom right of
Short press to start； Long press
the display：
Short press to start；
to shut down;
Long press to shut
down;
After starting the
machine,
After starting the machine,
short press to switch
the light on/off, press
twice to switch between
short press to switch
gears
the light on/off, press
twice to switch between gears
Safety Information
For your personal safety, please strictly follow the installation instructions. Please
check the below installation drawing carefully before installation, make sure to align
the cable head with the connector slot and do not install against rules.
Please align
the connector slot
Do not touch the main interface, make sure to align the cable head with
the connector slot and put the spring back in place.
SAFETY PROMPT TRANSPARENT LABEL FOR SCOOTER ARM
Safety Information
For your personal safety, please strictly follow the installation instructions. Please
check the below installation drawing carefully before installation, make sure to align
the cable head with the connector slot and do not install against rules.
Do not touch the main interface, make sure to align the cable head with
the connector slot and put the spring back in place.
07
DE-Montageanleitung für 5TH WHEEL Scooter M2
Dieser QR-Code ist ein Video-Tutorial zur Verwendung des Produkts. Wir empfehlen, diesen
QR-Code zu scannen, um mehr über die Anwendung des Produkts zu erfahren.
1. Die Starttaste muss 2-3 Sekunden lang gedrückt gehalten werden.
2. Zur Sicherheit ist der Roller M2 werkseitig auf Nicht-Null-Start eingestellt, Sie müssen
den Roller auf 3KM/H schieben, die elektrische Tür kann normal verwendet werden.
3. Der Scooter kann im normalen Gehmodus eingeschaltet werden, er kann nicht
gefahren und nur geschoben werden.
Bitte vor der
4. es kann während des Ladevorgangs nicht gestartet werden.
Fahrt beachten!
5. Bitte werfen Sie das Handbuch nicht weg, das spezifische Handbuch wird auch
erwartet, um das Handbuch zu konsultieren.
01