Dawn 5036 Montaj ve Kullanım Kılavuzu - Sayfa 2

Çiftlik Ekipmanları Dawn 5036 için çevrimiçi göz atın veya pdf Montaj ve Kullanım Kılavuzu indirin. Dawn 5036 19 sayfaları.

Sayfayı Yazdır

PLEASE CAREFULLY READ THIS MANUAL.

It is strongly recommended that you become familiar

with all operation and maintenance procedures of

your Dawn agricultural implement.

Failure to follow safety recommendations

NOTE:

while this implement is in operation, and/or failure to

properly store this implement, and/or failure to

adequately prepare this implement for transport, could

result in equipment damage, personal injury or death.

Please make yourself aware of all federal and local

laws that may apply to the transport, use and sale of

this implement.

WARRANTY INFORMATION

All new Dawn Equipment Company products carry a

limited warranty. Warranty assurances vary by device,

and can be found in the appendices of this or any

other Dawn Equipment Company Users Manual.

Warranty information is also available upon request

by contacting Dawn tollfree at 800.554.0007, or you

can request a copy in writing. Request warranty

information by e-mail at [email protected], or

by US Post at Dawn Equipment Company, PO Box

497, Sycamore IL 60178.

Dawn Equipment Company prides itself on the

manufacture of quality American made row crop tools.

Warranties will be honored by Dawn to dealers

authorized to sell Dawn Equipment products who, in

turn, honor such warranties to the original retail

purchaser. Should this equipment be improperly cared

for, or should it be modified to change performance

beyond OEM specifications, applicable Dawn

warranties will become void, and Dawn sponsored

implement improvements will not be granted.

Dawn Equipment Company makes no

Disclaimer:

claim to the safety or reliability of non Dawn OEM

parts or wholegoods used in conjunction with Dawn

OEM equipment, and shall not be held responsible for

any personal injury or property damage, or for any

complications with operational performance caused

by non Dawn OEM parts or wholegoods. Please

familiarize yourself with the users manuals, and safety

recommendations of all non Dawn OEM equipment.

Introduction

CONVENTION FOR OPERATOR CONTROLS.

We endorse and employ agricultural equipment

operator control standards set by the ASABE

Standards Committee. These standards are designed

to improve operator safety, efficiency, and awareness.

Note: Pursuant to Section 2 of S335.4 of the ASABE

Standards-- 2.2 ) Right-hand, left-hand and forward

designations are those related to the operator when in

the operating position or station. (facing the direction

of motion.)

WEIGHTS AND MEASURES

All Dawn Equipment Company parts and wholegood

designs adhere to the United States Customary Unit

System (Inch-Pound). All measurements in this

manual are labeled using only the aforementioned

units, unless otherwise explicitly specified. Use only

US Customary hardware and tools on all Dawn

Equipment products unless otherwise explicitly

specified.

USING THIS MANUAL

All Dawn manuals have been given a part number and

should be considered a principal element of the

device they accompany. Please ensure this manual is

kept in a location not subject to extreme conditions

(i.e. excess humidity, hydraulic fluid, etc.). Please

ensure that this manual remains with the implement if

traded, leased or sold.

ADDITIONAL INFORMATION

Additional information on this, and any other Dawn

tool can be found on the web at

www.dawnequipment.com. You may also contact

Dawn for information by phone 815.899.8000, by fax

815.899.3663, or by e-mail to

[email protected].

www.dawnequipment.com

Toll Free: 800.554.0007

Fax:815.899.3663