GREAT ARBOR GAC-252 Kullanıcı Kılavuzu - Sayfa 6

Ağ Yönlendiricisi GREAT ARBOR GAC-252 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. GREAT ARBOR GAC-252 20 sayfaları. Wi-fi dial up router

Sayfayı Yazdır

G E T T I N G

S T A R T E D

Making the First Connection

Setup your router and access the web wirelessly in 5 minutes or less

tart by unpacking the router. The package consists of :

(a) Router, (b) USB Phone-Modem, (c) USB hub, (d) WiFi Antenna, (e)

DC Adapter, (f) Phone cable, (g) Printed User Guide and (h) CD which

contains the User Guide and the DIAL Windows utility.

Connections will now be made to the back panel of the Router shown on the next page.

First, screw in the antennas to the antenna connectors at the back. DO NOT screw them

in too tightly to avoid damage the connectors. Attach the black USB phone modem to

any port of the white USB hub. Insert the USB hub's USB cable to the USB slot at the

side of the router. The USB hub is required to convert the high speed USB interface on

the router to the lower speed phone modem. Attaching the black USB modem directly

to the router may cause errors in transmission and so always use a USB hub in between

the black modem and the router.

Attach the phone cable to the RJ-11 slot on the phone modem and the other end of the

phone cable to a telephone wall jack. Plug in the DC adapter cable to the router and the

DC adapter to the wall power outlet.

both power and phone line is recommended.

push the ON/OFF button at the back of the router to turn the router on. The router

will power up and the SYS LED in the front will flash. Once it turns solid green the

router is ready. Press the

configured free ISP Internet using the default long distance phone number configured in

the router. The dial up process takes anywhere from 30 seconds to 1 minute depending

on the quality of your phone line and the ISP you are dialing. The LEDs on the black

modem will flash during this process. Once the connection is established, the

INTERNET LED labeled with a "Globe" graphic (see Figure 2) will start flashing about

once per second. If the LED does not flash, remove the power cable from the router,

Use of a power strip with surge protection for

DIAL

button at the back of the router to dial-out to the pre-

If the router does not turn on then

Chapter