Dyna-Glo RMC-LPC25DGP Kullanıcı Kurulum, Kullanım ve Bakım Kılavuzu - Sayfa 4
Isıtıcı Dyna-Glo RMC-LPC25DGP için çevrimiçi göz atın veya pdf Kullanıcı Kurulum, Kullanım ve Bakım Kılavuzu indirin. Dyna-Glo RMC-LPC25DGP 14 sayfaları. Propane construction heater
Ayrıca Dyna-Glo RMC-LPC25DGP için: Kullanıcı Kurulum, Kullanım ve Bakım Kılavuzu (15 sayfalar), Kullanıcı Kurulum, Kullanım ve Bakım Kılavuzu (11 sayfalar)
Sayfayı Yazdır
NEVER LEAVE THE HEATER UNATTENDED WHILE BURNING!
LPC25 Series
LPC80 Series
LPC200 Series
The heater is designed for use as a construction heater in
accordance with ANSI Z83.7, CSA 2.14. Other standards
govern the use of fuel gases and heating products for
specific uses. Your local authority can advised you about
these. The primary purpose of construction heaters is to
provide temporary heating of building under construction,
alteration or repair. Properly used, the heater provides
safe economical heating. Products of combustion are
vented into the area being heated.
For Technical Support or Troubleshooting, Call: 1-877-447-4768
(lb/h)
Minimum
Maximum
Maximum
1.16
0.7
(0.53 kg/h)
(0.32 kg/h)
3.71
2.32
(1.68 kg/h)
(1.05 kg/h)
9.28
2.32
(4.21 kg/h)
(1.05 kg/h)
Minimum
The heater must be located at least 6 ft. (1.83 m) in the
U.S.; or (ii) 10 ft. (3 m) in Canada, from any propane gas
container.
CLEARANCE TO COMBUSTIBLES:
2 ft. (60 cm)
4 ft. (1.22 m)
www.ghpgroupinc.com
.196
11.7 x 12.87
(4.98 mm)
(29.69 x 32.79 cm)
.196
15.9 x 18.3
(4.98 mm)
(40.41 x 46.99 cm)
.196
15.9 x 26.2
(4.98 mm)
(40.41 x 66.49 cm)
2 ft. (60 cm)
3 ft. (91 cm)
5 ft. (1.52 m)
6 ft. (1.82 m)
(37.8 °C).
3