Hi Viso 205-1600 Manuel - Sayfa 6

Koruma Cihazı Hi Viso 205-1600 için çevrimiçi göz atın veya pdf Manuel indirin. Hi Viso 205-1600 8 sayfaları. Ppe protective face visor with adjustable headband, foam padding and neck guard

Sayfayı Yazdır

Inspection

Carry out regular visual checks

to ensure the product is safe for

continued use.

1. Check the visibility through

the screen is adequate and not

hindered by scratches or scores.

2. Ensure the screen remains securely

attached to the foam peak with no

gaps or evidence of separation.

3. Check that all the Velcro dots are

securely in place and have suitable

adhesion to attach the headband

and neck guard.

Storage

When not in use, store the product

away from extremes of temperature.

Never place heavy items on top of it.

If the product is wet, allow it to dry

fully before placing it into storage.

Cleaning

Visor – rinse with warm soapy water

or disinfect with isopropyl alcohol.

Headband - rinse with warm soapy

water.

Neck guard – the neck guard is

machine washable up to 60oC. Air

4. Ensure the neck guard is free from

rips, tears or signs of damage to

the stitches.

If the product show signs of

damage or excessive wear and

tear, discontinue use and replace

immediately.

Anti-Fog

To prevent your visor from fogging,

apply a very small dot of washing

up liquid on the inside of the visor

and buff with a dry cloth until dry.

Repeat after each time you wash

the visor.

dry only. Do not tumble dry.

To remove any fluff from Velcro

attachment points, use a stiff brush

or another piece of hook Velcro.

Do not use abrasives on any

component of the product.