Active Silicon AS-CIB-IP-002-A Hızlı Başlangıç Kılavuzu - Sayfa 3
Bilgisayar Donanımı Active Silicon AS-CIB-IP-002-A için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Active Silicon AS-CIB-IP-002-A 13 sayfaları. Harrier ip camera interface board
Ayrıca Active Silicon AS-CIB-IP-002-A için: Hızlı Başlangıç Kılavuzu (7 sayfalar)
Sayfayı YazdırSetting up the Boards
If you have purchased a pre-assembled camera you can skip this step.
1. Connect the Harrier IP Camera Interface Board (SoC board) (J2) to the Ethernet Connection Board
(J1) using a 24-way 0.5mm pitch double ended (same side contacts) FFC cable. Ensure that the
cable is connected the right way round. For the SoC board (J2) the metal contacts should face
towards the microSD socket (see figure 2). For the connection board (J1), the metal contacts
should face the PCB.
2. Connect the SoC board (J8) to the camera LVDS output using a KEL 30-way microcoax cable.
3. To avoid damage the boards must be securely mounted so that the cables are not strained.
Figure 7. Harrier Ethernet Connection Board
March 2023
HARRIER IP CAMERA INTERFACE BOARD
Figure 8. Harrier IP Camera Interface Board
(SoC board)
QUICK START GUIDE
Version 1.04 – March 2023
Page 3 of 12