682DRUMS CMA-4 Manuel - Sayfa 4

Mikrofon 682DRUMS CMA-4 için çevrimiçi göz atın veya pdf Manuel indirin. 682DRUMS CMA-4 5 sayfaları. High quality drum microphones

DCT-4 Dynamic Snare and Tom Microphone

The DCT‐4 is a professional dynamic drum microphone for stage and studio usage. With a

frequency response of 50 Hz – 14.5 kHz and the ability handling extreme sound pressure

levels of up to 140dB without distortion. The DCB‐4 is specially developed for miking snare

drums, rack toms, floor toms and congas.

The DCT‐4 has a uni‐directional cardioid polar

pattern for excellent rejection of unwanted sound

and to insure high gain before feedback.

The DCT‐4 microphone is made of a durable

aluminium‐die casting housing and a wired mesh

grill with build in wind screen.

The SHM2 shock mount that goes with the DCT‐4

prevents the mic picking up unwanted noise from

moving toms or vibrations from the stage when

using a mic stand.

The microphone adopts a standard XLR (male)

connector. The SHM1 shock mount that goes with

this mic uses the standard thread 5/8" or 3/8", which can be easily assembled with different

kinds of microphone stands.

Characteristics:

Specific frequency response

Low disturbance when impedance varies, high gain before sound's feedback.

Low noise, high SPL endurable, 140dB.

Fit to use for snare drum, rack toms, floor tom, and percussion

Technical specifications:

Element: Dynamic

Polar Pattern: Uni‐directional cardioid shaped

Frequency Response: 50Hz‐14.5kHz

Sensitivity: 56 dBV/Pa, (1.6 mV), ref. 1 Pascal=94 dB SPL

Output Impedance: 250Ω±30% (at 1kHz)

Max. Input SPL:140 dB (at 1kHz ≤1% T.H.D)

Polarity

Positive pressure on diaphragm

produces positive voltage on pin 2

relative to pin 3 of XLR output connector

Length: 137mm