Great day PowerLoader PL250 Manuel - Sayfa 2

Otomobil Aksesuarları Great day PowerLoader PL250 için çevrimiçi göz atın veya pdf Manuel indirin. Great day PowerLoader PL250 5 sayfaları.

PAGE 2 OF 5

INSTRUCTIONS FOR INSTALLATION AND USE

STEP 1: Find a clean flat surface to work on and

assemble the mounting brackets to the PowerLoader.

A. Remove the two 2" Quick Clip pins and fold the

Power Loader out. This will allow attachment of

mounting brackets to the vertical brace on the Power

Loader. (See Fig. 2)

Fig. 2

A. Start with the left mounting bracket and attach it to the left vertical brace of the Power Loader facing the

angle to the outside of the vertical brace. (See Fig. 3A & 3B) Secure using two 1/4" x 2 1/2" bolts, washers

and wing knobs. There are 4 nylon spacers provided for minor adjustments to the mounting brackets. Next,

attach the right mounting bracket to the right vertical brace.

Fig. 3a

Fig. 3b

A. Next, fold the Power Loader to it's original position and replace the two 2" Quick Clip pins.

A. Place the two horizontal arms on ATV/UTV front rack and slide the Power Loader towards the

ATV/UTV until it touches the front of the ATV/UTV. Secure to the front rack with the U-Bolts provided

(see Fig. 4A & 4B). **NOTE** If adjustments are needed to fit the horizontal arms to the rack, use the four

nylon spacers or the mounting brackets can be moved to the inside of the vertical braces on the Power

Loader. The Power Loader can be adjusted to fit most ATVs/UTVs.