Dyna-Glo WHF100 Önemli Talimatlar Kılavuzu - Sayfa 5

Elektrikli Isıtıcı Dyna-Glo WHF100 için çevrimiçi göz atın veya pdf Önemli Talimatlar Kılavuzu indirin. Dyna-Glo WHF100 17 sayfaları. Wall heater fan

OPERATING INSTRUCTIONS

This fan is equipped with manual "MAN" and auto-

matic "AUTO" settings. Set the rocker switch to "MAN"

for manual mode, allowing the fan to continuously run

until the rocker switch is returned to the OFF "O" posi-

tion. Set the rocker switch to "AUTO" for the auto-

matic mode, which will turn the fan on and off based

on ambient room temperature. It may take 5 to 10

minutes for the fan to come on when the unit is cold.

T - Temperature Switch

M - Motor

K - Power Switch

NOTE: If any of the original wire as supplied with the appliance must be replaced, it

must be replaced with a wire of at least an equal temperature rating.

CAUTION: Label all wires prior to disconnection when servicing controls.

Wiring errors can cause improper and dangerous operation. Verify proper operation

after servicing.

Electrical Wiring Diagram

AUTO

Fan Rocker

Switch