Hi-Force HEP3 Kullanım Kılavuzu - Sayfa 4

Su Pompası Hi-Force HEP3 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Hi-Force HEP3 8 sayfaları. Electric driven pumps, general duty, medium/high flow
Ayrıca Hi-Force HEP3 için: Kullanım Talimatları Kılavuzu (20 sayfalar)

Sayfayı Yazdır
Hi-Force HEP3 Kullanım Kılavuzu
INSTRUCTION MANUAL – Electric Driven Pump Series HEP:
removed and replaced. Replace
covers afterwards.
Instructions for HEP103 series two stage
compact pumps:
Models: HEP103241LS,HEP103242LS,
HEP103241S, HEP103242S, HEP103341,
HEP103342, HEP103441, HEP103442,
HEP103441LS, HEP103442LS

Specification:

Electric
Model No:
Motor
0.45kW-
Ist Stage: 2.5 l/min to
100/110v-
150 Bar
1- Phase-
HEP103**
2nd Stage: 0.35 l/min to
50/60Hz -
700 Bar
9.5A
0.45kW-
Ist Stage: 2.5 l/min to
220/240v-
150 Bar
1- Phase-
HEP103**
2nd Stage: 0.35 l/min to
50/60Hz -
700 Bar
9.5A
Instructions before use.
Visually inspect all components for
damage or oil leaks.
Ensure control pendant cable is correctly
fitted before connecting to the mains
supply.
Oil filler plugs are shut tightly when being
shipped and not in use.
Before pump is to be used, turn this plug
by 1 to 2 turn anti- clockwise to open the
vent. See Figure 1.
Figure 1:
DO NOT OPERATE PUMP WITH VENT
CLOSED AS THIS MAY CAUSE NO OIL
DELIVERY OR A BUILD UP OF PRESSURE.
Ensure the correct power supply is
●
used for your model of Hi-Force
pump. Either 110V or 220/ 240V
50/60Hz single phase.
Hi-Force Limited – Prospect Way – Daventry – Northants NN11 8PL – United Kingdom
Tel: +44(0) 1327 301000: Fax: +44(0) 1327 706555: Website: www.hi-force.com
Model Series: HEP1, HEP103, HEP2, HEP3, HEP5
Oil
Hydraulic Pump
Capacity
5.0 litres
(Useable
4 litres)
5.0 litres
(Useable
4 litres)
Check the oil level before use.
●
Retract the cylinder fully
beforehand to do so. Only use Hi-
Force Hydraulic oil.

Operation.

HEP103341 and HEP103342
1. Close release valve lever by turning
clockwise 45°. See Figure 2.
2. Press 'ON' button to advance cylinder.
Release the button and the cylinder will
hold its position.
3. To retract cylinder return release valve
lever to its original position.
Figure: 2
Circuit Diagram: HEP103341, HEP103342
HEP103241LS HEP103242LS
1. Press 'ON' button to run the motor to
advance the cylinder. If the 'ON' switch is
released the motor stops and the
cylinder's piston remains stopped for load
holding.
2.Press 'OFF' button to retract cylinder.
Circuit Diagram: HEP103241LS,HEP103242LS