Active Silicon FireBird Hızlı Başlangıç Kılavuzu - Sayfa 7
Medya Dönüştürücü Active Silicon FireBird için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Active Silicon FireBird 12 sayfaları. Frame grabbers
Ayrıca Active Silicon FireBird için: Hızlı Başlangıç Kılavuzu (12 sayfalar)
Sayfayı Yazdır
ASDEMO APPLICATION - BASIC OPERATION
This is a GenICam GenTL demo
program that can be used with cameras
supporting GenICam, such as CoaXPress
ones.
Note: The above refers to Windows. For the location of utilities and documentation for other operating systems refer to the specific Quickstart Guide.
Note: <xx> represents the camera interface, e.g. CXP or CL.
FireBird Frame Grabber – Quickstart Guide v1.6
Run the program from the Start Menu
under Active Silicon FireBird <xx> –
ASDemo. The use of GenICam means
that no manual setup of the camera or
frame grabber is needed to get a picture
– simply connect and click Live.
In common with standard GenICam
programs, to get a live image:
1. Select TLActiveSilicon.cti.
The program will then attempt to
communicate with the camera and
download the XML file from it.
2. The Found Hardware tab should
show the frame grabber and
camera as shown here. Click on
Stream#1.
3. Click Connect.
4. Click Live.
7