Dyna-Lite RP800 Kullanım Kılavuzu - Sayfa 7

Güç Paketi Dyna-Lite RP800 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dyna-Lite RP800 12 sayfaları.

RP400/RP800/RP1600

Power Packs

1. AC On / Off Power Switch - Turns power

pack on and off. Also offers a dual propor-

tional dimmer slide switch for modeling

light control, including Full Off, so that the

cooling fan can continue to run.

2. Two stop Variator Control - Fine-tune your

power settings in 0.2 stop detented incre-

ments. Used in combinations, the power

control switches and Variator provide a total

of 15 different power settings with a single

flash head.

3. Power Control Switches – Three position

full/half/quarter power switches provide

power settings over a three stop range per

channel. (These can be trimmed using the

Variator or combined using the Ratio output

switch.)

4. Flash Head Outlets – The RP packs are

capable of accepting up to three heads. All

outlets are arc protected. This means that it

is completely safe to plug and unplug flash

head cables into the outlets even while the

pack is on.

5. AC Power Cord Socket and Circuit Breaker - Offers easily rest-able protection.

6. Ratio/Combined Output Switch - An indicator light tells you whether your power is routed symmetrically or asymmetrically

between the "A" and "B" flash head outlet banks.

7. Sync Input Socket – ¼" Phono style jack for plugging in sync cord, slave or optional radio slave.

8. Ready Light/Test Switch - When lit the pack is fully charged. This button can also be used to manually trigger the pack.

9. Audible Ready Indicator Switch- Get audible confirmation that the pack is fully recycled to full power

3 .

5. (back)