Dynablast BEF series Operatör El Kitabı - Sayfa 3
Basınçlı Yıkama Dynablast BEF series için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. Dynablast BEF series 19 sayfaları. Hot water
1.
Read all safety and operating instructions before using the unit.
2.
Read all electrical hook up instructions.
3.
Read warnings on additive containers.
4.
DO NOT CHANGE NOZZLE size. The incorrect nozzle could cause excessive pressure
resulting in pump damage and possible personal injury. Refer to parts list for correct
nozzle size.
5.
The water discharge from this pressure cleaner is under extremely high pressure. DO
NOT point it where damage or injury could result. E.g. Eyes, Skin, People, Animals.
6.
DO NOT point gun toward an electrical outlet as you risk severe shock and personal
injury.
7.
Look for loose couplings or damage to high-pressure hose. These areas may indicate
possible rupture points.
8.
Read WARNINGS on additive containers.
9.
BE CAREFUL OF SLIPPERY FLOORS. Some additives make a normally safe area
extremely slippery and dangerous.
10. KEEP CHILDREN AWAY from the machine and wash area.
11. VENTILATE work area when using toxic or pungent additives to reduce your exposure to
the noxious fumes.
12. Use PROTECTIVE WEAR, especially for the eyes and skin.
13. Whenever you stop spraying, always engage the safety latch on the trigger gun.
14. Whenever changing nozzles, always turn the electric motor off and always relieve the
pressure by triggering the gun. Always engage the safety latch on the trigger gun.
Always change the nozzle with the gun and wand pointed away from you, and never
pointed at any person or animal.
15. DO NOT use gasoline, crankcase drainings or oil containing gasoline or solvents.
16. Exhaust fumes are poisonous. Never run the unit in an enclosed area or inside a building
UNLESS your machine has been properly vented in accordance with local regulating
authorities and/or CSA standard B139.
WARNING- Risk of injection or severe injury. Keep clear of nozzle. Do not direct
discharge stream at persons. This equipment is to be used only by trained
operators.
SAFETY INSTRUCTIONS
1
BEF
SERIES