Hi-Force MHP100 Kullanım Kılavuzu
Su Pompası Hi-Force MHP100 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Hi-Force MHP100 3 sayfaları. Hydrotest pump series
Sayfayı Yazdır
Hydrotest Pump Series: MHP100 – MHP1000
1.0 Inspection of the product upon receipt:
On receipt of the product, visually inspect the
item for any evidence of shipping damage.
Please note shipping damage is not covered
by warranty. If shipping damage is found notify
the carrier immediately and refrain from putting
the product into service. The carrier is
responsible for repair and replacement costs
resulting from damage in transit shipment.
2.0 Safety Precautions:
Read and follow all the instructions and safety
warnings carefully prior to use of the equipment.
Failure to do so could result in equipment
damage or failure of the equipment or personal
injury. Hi-Force will not be held responsible for
any damage to the equipment or personal
injury resulting from unsafe use of the product,
lack of maintenance or incorrect operation. If in
doubt on the correct usage of any Hi-Force
equipment, contact your nearest Hi-Force office
or distributor. If the operator has not been
trained on high pressure hydraulic equipment
and its safe use consult your local Hi-Force sales
Hi-Force Limited – Prospect Way – Daventry – Northants NN11 8PL – United Kingdom
Tel: +44(0) 1327 301000: Fax: +44(0) 1327 706555: Website: www.hi-force.com
INSTRUCTION MANUAL:
Model Series: MHP100 –MHP1000 inclusive
office who can offer you training courses for
operators.
All operators should ensure that all necessary
personal protective equipment as specified by
their employer is worn when operating any
hydraulic equipment. Safety shoes, safety
glasses/ visor and protective gloves should be
worn at all times. All relevant risk assessments
should be completed prior to use of the
equipment.
Pump
Model
Number
MHP100
MHP300
MHP500
MHP700
MHP1000
Read this entire manual before operating the
pump.
Failure to observe the following warnings could
result in serious bodily injury.
Danger: If oil is injected under the skin consult a
doctor immediately.
MHP PUMP SELECTION CHART
Maximum
Low Pressure
Working
Displacement
Pressure
Per Stroke
(Bar)
(cm3)
100
50
300
50
500
50
700
50
1000
50
Safety
Ensure that all equipment connected is
in good conditions and is rated for the
operating pressure of the pump
Whenever possible, use a pressure
gauge with the pump. The optional
gauge is easily fitted to the top of the
pump. See selection chart for correct
gauge
Only use hydraulic hoses in good
condition that have a safety factor on
burst pressure of 4:1.
Ensure reservoir has sufficient capacity
for the required operation.
Do not handle hoses that are
pressurised. Oil escaping under
pressure will penetrate the skin causing
serious injury.
Never
pressurise
uncoupled
couplers
Always
wear
appropriate
Protective Equipment when using this
pump.
High Pressure
Optional
Displacement
Pressure
Per Stroke
Gauge Kit
(cm3)
22
MHP100GK
8
MHP300GK
4
MHP500GK
3
MHP700GK
2
MHP1000GK
hose
Personal